The integral core (insert) of the RFID label is a chip where data is saved and stored and an antenna transmitting data to the reader. Moreover, the label conists of paper or plastic film and an adhesive selected depending on the needs and a specific application. RFID labels differ also in terms of size and shape of the insert, radio frequency, and memory capacity. They are designed for thermal transfer printing, and they can be delivered pre-printed. Thanks to the technology used, the solution enables to save a lot of data, to save it many times on the same medium, and it ensures extremely rapid readout and readout of many labels at the same time. They are used for labelling and tracing diverse products, including as a form of product protection from its falsifying.

Saving a lot of data

High readout speed

Simultaneous readout of many labels

Ensurence of product protection

Don’t forget the ribbon

Wax-resin ribbons

The specificity of printing with wax-resin ribbons

From among all types of thermal transfer ribbons, the wax-resin ones have the highest versatility as they meet a wide range of needs relating to label printing in logistics, production, or distribution. They are perfect for use in environments with medium or high risk of abrasion or contact with chemicals. High density of the wax-resin ink ensures very high blackness level and its sensitivity to heat guarantees perfect sharpness and accuracy of printing which result in excellent legibility of barcodes. Printing speed is high and similar to the one for most wax ribbons (up to 300 mm/s) or up to 800 mm/s, and it can achieve as much as 1 m/s on packaging lines. Using wax and resin ribbons ensures good durability of print which is resistant to abrasion, smudging, and scratching at temperatures not exceeding 100°C usually, but sometimes reaching 150°C. The wax-resin ribbons are designed for thermal transfer printers regardless of the print head technology. Our products comprise ribbons for flat head and edge head printers as well as different ribbon classes depending on the amount of contained resin, so depending on the application.

Read more

What’s next?

Tell us about your needs

Call us or write to us and tell what requirements must be met by the labels, in what conditions they are going to be used.

Analysis of the target use

We explore the topic presented – if necessary, we go to the place where the labels will be used.

Selection of materials and tests on samples

We match the labels (or several types of them) to the ascertained requirements and send their samples to carry out tests and select the best ones.

Offer for a selected solution

We present a price offer for selected labels and optionally contract proposal regarding material deliveries.

Let’s talk about your project

Irrespective of what labels you need, we will select the best ones, meeting even high requirements.

ul. Gromadzka 54a, 30-719 Cracow, Poland
+48 12 293 27 00

    This site uses cookies. Learn more about the purpose of their use and changing the settings in your browser. Read more