The label is made of white, wood-free, calandered paper and an all-purpose permanent acrylic-based adhesive. It is characterised by excellent adhesion and resistance to low temperature on different types of substrates (ranging from -20 to +80°C). Smooth label surface is suitable for single- and multi-colour printing in all typical printing technologies (including thermal transfer) and ensures excellent properties where the glossy surface finish is not required. Pursuant to the relevant regulations, it can be used for direct contact with dry, moist, and non-fatty food. This is an economical and universal label used, e.g. for labelling stock, or other in-house identification labelling of products.

Excellent adhesion

Perfect print results

Resistance to low temperature

Suitable for food contact

Do you have any specific expectations?

It will be helpful to define all the know information relevant to the required labels.

Don’t forget the ribbon

Wax ribbons

The specificity of printing with wax ribbons

A wax ribbon is coated with ink (dye) made primarily from wax-based ingredients. It is an economical and the most popular solution for printers with flat heads. It ensures high printing speed (up to 300 mm/s depending on the combination of the label and the ribbon), very good quality of printing barcodes, fonts, and graphic designs and, thereby, their legibility and durability of print at 60°C. Wax inks are characterised by lower melting point when compared to wax-resin and resin dyes thanks to which they are less burdensome for the print head and aid its longer service life. However, due to the higher softness of the wax ink, the printing made using it is more prone to smudging or scratching when compared to other dyes. Wax ribbons differ in terms of the amount of energy required for the printing process, blackness level, and resistance to abrasion. We offer a choice of wax ribbons with a specific price to efficiency ratio.

Read more

What’s next?

Tell us about your needs

Call us or write to us and tell what requirements must be met by the labels, in what conditions they are going to be used.

Analysis of the target use

We explore the topic presented – if necessary, we go to the place where the labels will be used.

Selection of materials and tests on samples

We match the labels (or several types of them) to the ascertained requirements and send their samples to carry out tests and select the best ones.

Offer for a selected solution

We present a price offer for selected labels and optionally contract proposal regarding material deliveries.

Let’s talk about your project

Irrespective of what labels you need, we will select the best ones, meeting even high requirements.

ul. Gromadzka 54a, 30-719 Cracow, Poland
+48 12 293 27 00

    This site uses cookies. Learn more about the purpose of their use and changing the settings in your browser. Read more