Extra Tack Label (ETL) is white, polypropylene film with a very strong special-purpose adhesive based on rubber. It ensures excellent adhesion to the curved and highly irregular surface of vehicle tyres, neglecting the adverse impact of surface pollutants, including agents promoting removal from the mould or ingredients migrating from the rubber. The label material does not exert any adverse impact on the properties and performance of the labelled tyres. It is also used for labelling rigid, hard substrates (glass, PET). ETL shall be used at -20 to +70°C..

Excellent adhesion

Best for tyre labelling

Innocuousness for tyre properties

Excellent for rigid substrates

Use in industries

Automotive

Check

Construction and window

Check

Do you have any specific expectations?

It will be helpful to define all the know information relevant to the required labels.

Fill in the detailed form

Don’t forget the ribbon

Resin ribbons

The specificity of printing with resin ribbons

Thermal transfer resin ribbons were made for the most demanding applications where resistance to high or low temperatures, mechanical strength, resistance to solvents or detergents are a must. Thanks to those properties, they ensure the highest print quality when compared to other thermal transfer ribbons, which is preserved usually up to 180°C, but even up to 300°C as well. It is similar for the print quality which reaches the highest level thanks to the ribbon capability to provide excellent print sharpness. Resin dyes require more energy from the print head to transfer to the label which is why the printing speed may be max. 250 mm/s, therefore lower than using wax-resin ribbons. Resin ribbons are compatible both with flat head and edge head printers. The major differences among resin ribbons refer to their features as regards resistance to: abrasion, scratching, temperature, solvents, and certain detergents. We have a wide range of resin ribbons for specific applications.

Tell us about your needs

Call us or write to us and tell what requirements must be met by the labels, in what conditions they are going to be used.

Analysis of the target use

We explore the topic presented – if necessary, we go to the place where the labels will be used.

Selection of materials and tests on samples

We match the labels (or several types of them) to the ascertained requirements and send their samples to carry out tests and select the best ones.

Offer for a selected solution

We present a price offer for selected labels and optionally contract proposal regarding material deliveries.

Let’s talk about your project

Irrespective of what labels you need, we will select the best ones, meeting even high requirements.

SKK S.A.

ul. Gromadzka 54a, 30-719 Cracow, Poland

+48 12 293 27 00

info@skkglobal.com

Extra Tack Label