Destruct Tear Label
Destruct Tear Label (DTL) is composed of white, matte polyethylene film coated with clay and a permanent water-based acrylic adhesive. It adheres to the substrate very well and gets delaminated during any attempted removal. It is great on any surface, including a rough one, and at temperatures ranging from -20 to +70°C. It is a model protection of products or brands which is so important particularly in the pharmaceutical, electronic, or FMCG sector.
Do you have any specific expectations?
It will be helpful to define all the know information relevant to the required labels.
Don’t forget the ribbon
The specificity of printing with resin ribbons
Thermal transfer resin ribbons were made for the most demanding applications where resistance to high or low temperatures, mechanical strength, resistance to solvents or detergents are a must. Thanks to those properties, they ensure the highest print quality when compared to other thermal transfer ribbons, which is preserved usually up to 180°C, but even up to 300°C as well. It is similar for the print quality which reaches the highest level thanks to the ribbon capability to provide excellent print sharpness. Resin dyes require more energy from the print head to transfer to the label which is why the printing speed may be max. 250 mm/s, therefore lower than using wax-resin ribbons. Resin ribbons are compatible both with flat head and edge head printers. The major differences among resin ribbons refer to their features as regards resistance to: abrasion, scratching, temperature, solvents, and certain detergents. We have a wide range of resin ribbons for specific applications.
Tell us about your needs
Analysis of the target use
Selection of materials and tests on samples
Offer for a selected solution
Let’s talk about your project
Irrespective of what labels you need, we will select the best ones, meeting even high requirements.