Cryo Foil is made of special robust, white, glossy, coated polyolefin film and a permanent water-based acrylic adhesive. It is designed for labelling cryogenic containers for laboratory samples, cryogenic vials, and polypropylene test tubes as well as cardboard boxes stored at temperatures ranging from -150 to -196°C achieved by means of liquid nitrogen. Cryo Foil protects the identification information of biological samples throughout the entire period of their life extended by extremely low temperatures. Moreover, the label withstands many thawing and freezing cycles — up to 10 times when then samples are thawed at room temperature or in warm or ice-cold water and then they are placed in the freezer again.

snieg_platek
Resistance to extremely low temperature

Resistance to multiple thawing and freezing

Storage in liquid nitrogen

Cryogenic container labelling

Do you have any specific expectations?

It will be helpful to define all the know information relevant to the required labels.

Don’t forget the ribbon

Resin ribbons

The specificity of printing with resin ribbons

Thermal transfer resin ribbons were made for the most demanding applications where resistance to high or low temperatures, mechanical strength, resistance to solvents or detergents are a must. Thanks to those properties, they ensure the highest print quality when compared to other thermal transfer ribbons, which is preserved usually up to 180°C, but even up to 300°C as well. It is similar for the print quality which reaches the highest level thanks to the ribbon capability to provide excellent print sharpness. Resin dyes require more energy from the print head to transfer to the label which is why the printing speed may be max. 250 mm/s, therefore lower than using wax-resin ribbons. Resin ribbons are compatible both with flat head and edge head printers. The major differences among resin ribbons refer to their features as regards resistance to: abrasion, scratching, temperature, solvents, and certain detergents. We have a wide range of resin ribbons for specific applications.

Read more

What’s next?

Tell us about your needs

telefon_dymek
Call us or write to us and tell what requirements must be met by the labels, in what conditions they are going to be used.

Analysis of the target use

osoba_dymek2
We explore the topic presented – if necessary, we go to the place where the labels will be used.

Selection of materials and tests on samples

reka_wybor
We match the labels (or several types of them) to the ascertained requirements and send their samples to carry out tests and select the best ones.

Offer for a selected solution

reka_przywieszka
We present a price offer for selected labels and optionally contract proposal regarding material deliveries.

Let’s talk about your project

Irrespective of what labels you need, we will select the best ones, meeting even high requirements.

SKK S.A.
ul. Gromadzka 54a, 30-719 Cracow, Poland
+48 12 293 27 00
info@skkglobal.com

    This site uses cookies. Learn more about the purpose of their use and changing the settings in your browser. Read more